|
From this page you can purchase non asbestos jointing gasket sheet from 0.5 to
5mm thickness. Remember that as a general rule you should select the thinnest
material possible for your application.
General Properties of Non-asbestos jointing gasket sheet compressed with aramid
firbre and NBR.It generally have very good oil resistant properties. They are
also good for use in applications that put them into contact with water, petrol,
or natural gas.
As such, non-asbestos jointing gasket are used in air compressors, diesel
engines, pipelines, and many other general industrial and marine environments.
If you can’t find what you are looking for, or require a bespoke material,
please do not hesitate to contact us.
Is Non-Asbestos jointing sheet the Best Material for My Application? If you are
unsure as to which material is best for your application then you can consult
our gasket material selector. Material specifications can be downloaded from the
link on the left of this page.
Alternatively, we are always happy to offer technical help and advice and so if
you require assistance then please do not hesitate to contact us.
Product Specification
• Supplier = Cling-Seal
• Condition = New
• Thicknesses Available = 0.5mm-5.0mm
• Sheet Size Available =
1500*1500mm,1500*2000mm,1270*1270mm,1270*3810mm,Etc
|
Items |
Data |
| Tensile Strength
(ASTM F152) |
Mpa≥ |
9.0 |
| Compressibility
(ASTM F36J) |
% |
7~17 |
| Recovery (ASTM
F36J) |
%≥ |
45 |
| Creep Relaxation
(ASTM F38) |
%≤ |
40 |
| Density |
g/cm³ |
1.8±0.1 |
| Flexibility at Room
Temperature |
Bend 180°on the rod
with diameter which is 12 times of nominal thickness of the
sample, no crack. |
|
Immersed into IRM 903 at 149°for 5hours |
Decrease Tensile
Strength |
%≤ |
40 |
| Weight Increase |
%≤ |
25 |
| Variation in
Appearance |
- |
No Bubble |
|
Immersed into ASTM B during 21°~30°for 5hours |
Thickness Increase |
%≤ |
20 |
| Flexibility |
- |
No Crack |
|
Sealability for Oil at Room Temperature |
Medium Pressure |
Mpa |
8.0 |
| Requirement |
No
Leakage Within 30Minutes |
|
Immersed into H₂O
and (HOCH₂)₂
at 100°±2°for 5hours |
Weight Increase |
%≤ |
15 |
| Thickness Increase |
%≤ |
15 |
| Nitrogen Leakage |
mL/min≤ |
1.0 |
| Working Temperature |
Instant/Normal |
℃ |
300/-30--250 |
| Working Pressure |
Max/Normal |
Mpa |
4.0/2.0 |
Product Technical Details
As a general rule, Non-asbestos jointing gasket sheet is:
• Good for use with water
• Good for use with petrol
• Have good resistance to oil
Customer Service
We are happy to answer any questions that you might have about this product.
Please contact us for more information. |
