From this page you can purchase asbestos jointing gasket sheet from 0.5 to 5mm
thickness. Remember that as a general rule you should select the thinnest
material possible for your application.
General Properties of asbestos jointing gasket sheet compressed with asbestos
firbre and kinds of rubber. It general use in Plumbing and heating equipment,
low pressure water pipe and steam pipe sealing gasket material.
If you can’t find what you are looking for, or require a bespoke material,
please do not hesitate to contact us.
Is Asbestos jointing sheet the Best Material for My Application? If you are
unsure as to which material is best for your application then you can consult
our gasket material selector. Material specifications can be downloaded from the
link on the left of this page.
Alternatively, we are always happy to offer technical help and advice and so if
you require assistance then please do not hesitate to contact us.
Product Specification
• Supplier = Cling-Seal
• Condition = New
• Thicknesses Available = 0.5mm-5.0mm
• Sheet Size Available =
1500*1500mm,1500*2000mm,1270*1270mm,1270*3810mm,Etc
Items |
Data |
Tensile Strength (MPa,min.) |
≥21.0 |
Compressibility(%) |
12±5 |
Recovery(%) |
≥45 |
Density (g/cm³) |
2.0±0.1 |
Aging Coefficient |
≥0.9 |
Stress Relaxation (%) |
≤50 |
Steam Sealing, At 140-150Deg, 1.5-2Mpa
for 30Min |
No Crack |
Working Temperature |
510Deg |
Working Pressure |
7Mpa |
Product Technical Details
As a general rule, exhaust gasket sheet is:
• Good for use with water
• Good for use with petrol
• Have good resistance of pressure
Customer Service
We are happy to answer any questions that you might have about this product.
Please contact us for more information.
|